Mechwat is a leading manufacturer and service provider of prefab engineering. Security Guard Post Portable Office Cabin are manufacture for Various Construction site, Mines industries, Power Project Site, Road Project, Toll Booth Plaza,etc.
| S.No. | Features | Detail |
| 1 | Container Shell & Size | [LxWxH] : 14 ft x 10 ft x 8.5 ft. The shell fabricated from tested quality steel duly welded, comprising of base frame, peripheral structure, self-draining roof, entry door and windows. The four corner Columns will be sufficiently strengthened to facilitate transportation, lifting and placing. |
| 2 | Base Frame | The base frame would be made of a pressed mild steel channel section. The main structural element will be 80 X 40 SQ pipe 2.5mm thick and cross members should be of ‘Z’ channels section size 60mm x 70 mm x 60mm. |
| 3 | Side and End Walls | The side and end frame made out of pressed sections of suitable profiles / Pillars of sufficient strength. Exterior wall made up of 1.6 mm MS specially corrugated sheet, whereas 6mm thick decorative particleboard wall cladding sheet to be used for interior walls. These steel sheets will be treated for corrosion resistance. Panels will be vertically corrugated. Sheets will be continuously welded to top side and base structure so as to offer better strength to weight ratio. All gaps to be sealed at edges and at the seam, bottom, etc. to prevent the ingress of moisture. |
| 4 | Insulation | 50 mm thick Glass wool Insulation would be used for walls and 50 mm thick insulation material to be provided for roof and sidewalls. |
| 5 | Inner Panelling | The interior will be aesthetically finished so as to give a custom-built appearance with extremely high-quality workmanship. All vertical and horizontal corners should be neatly and smoothly finished. The Panelling of sidewalls and roof will be of 6mm thick decorative particle board For Sanitation Unit or Ablution Block, Inner paneling will be done with 4mm thick 100% Water Proof Bakelite Sheets or 3mm thick ACP Panel. |
| 6 | Flooring Systems | On the bottom frame, 18 mm thick composite cement sheet will be fixed by means of a self-tapping screw. 1mm thick type PVC Vinyl flooring will be fixed on the cement sheet. For Ablution/Sanitation Block, On the cement sheet, Anti Slippery Ceramic Tiles will be fitted with proper drainage arrangement. |
| 7 | Roof | Self-draining type roof will be made out of 20 gauge thick M.S. Sheet, adequate roof bows are to be provided. The roof will be adequately cambered for draining of rainwater. Interior paneling would be done in 6mm thick decorative laminated
plywood with adequate insulation |
| 8 | Windows | Aluminum windows 2.5’ feet x 4’ feet minimum, sliding-type will be provided made of Aluminum Profile section, 4 mm thick clear vision glasses. All windows/doors to have external weather shed. |
| 9 | Door | The size of the half window door will be of 6.5’ height x 3’.3” width. The door will be of external opening type made out of the same material as wall panels with door closing unit. The construction of the door would be double skin steel construction with 50 mm thick Glass wool insulation. The door interior will be finished with same material matching with that of the bunkhouse interior. The door will be provided with locking arrangement with separate handles on both sides of the door as required- |
| 10 | Electrical System | The Bunk Houses will be provided with electrical wiring suitable for 250 volt, 50 HZ single-phase AC power supply. All electrical wiring would be concealed. Bulk head and tube lights will be provided as required. Suitable copper cables will be used for lighting circuits. The cables used will be of 1.5 sq. mm. and 2.5 sq. mm. cables for lighting circuits. ISI mark and concealed in PVC conduits insulated copper wire will be used for wiring to be done in PVC conduit with small size distribution board with MCB protection and to separate with main supply. Light
fittings included LED lights, ceiling fans as per the electrical plan will be provided. Internal switchboard and Pre-wiring for air conditioners will be provided. All plugs & sockets will be as per your Country’s Standard. Electrical Wiring and Fittings will be done as per your Country’s Standard-
1. Two nos. wall fan provided 2. Two nos. LED Light Provided 3. Provision of Split AC Provided 4. MCB & DB Box provided 5. 4 Nos. Bulkhead Light Provided for Exterior. |
| 11 | Painting | All components will be primed. Quoted with zinc chromate, primer. The external surfaces will be initially prime with an Epoxy primer. And finally, Fine quality decorative Epoxy or PU paint will be applied in the final stage- |
| 12 | Hooks & Legs | 4 Hooks on top of the cabin & 6 legs of 8” will be Provided. |
| 13 | Furniture Material | 1. 6 ft x 8 ft Aluminum Partition Provided as per given drawing.
2. 16 Ft Desk Platform provide along with 3 Nos. Drawer. 3. 2 Nos. Revolving Chair Considered. |
Every Brand Has Stories Tell-Stories That Will Not Only Engage, Inform, Surprise, Delight, And Impact Their Audience But Will Also Deliver On Measurable Business Goals.
Latest Posts
- Container Homes 17 March 22
- Gender Equality and Social Inclusion (GESI) in WASH 14 June 22
- Flatpack Container Housing 22 March 22
Contact Us
A/209, Sobo Centre, South Bopal,
Ahmedabad- 380058
Phone: 027-17402196
Mobile: (+91) 9824528967
Email: info@mechwat.com
26, Bala Tripura industrial estate,
Shah alloys road, Santej
TA : Kalol, Gandhinagar – 382721
Mobile: (+91) 9978350694